call us on: +86 755 2733 5064  E-mail: wy@jiemeimould.com  
Jie Mei Precision Mould Ltd
Tel: +86 755 2733 5064
E-mail: wy@jiemeimould.com
Product Categories
Knowledge
Home > KNOWLEDGE > Content

Die crack what are specific reasons

Jie Mei Precision Mould Ltd | Updated: Jan 14, 2017

1. mold material not in the subsequent processing of fragile
2. heat treatment: hardening tempering process undue deformation
3. mold grinding flatness is not enough, and deflection
4. design process: the strength is not enough, too close to the edge spacing, mould structure unreasonable template blocks without enough padding feet
5. improper line cutting processing: line control line cutting, the gap does not, no clearance angle
6. Press device selection: press tonnage, blanking is not enough, the transfer mode is too dark
7. removal is not suitable: no demagnetization treatment before production, no RMA; production of needle spring broken

Contact Us
Address:No.172, Yanluo Road, Songgang Town, Bao'an District, Shenzhen City, China
Tel: +86 755 2733 5064  Fax:+86-755-27335065
E-mail:wy@jiemeimould.com
Copyright © Jie Mei Precision Mould Ltd